Project a big image from your home or small office! Now you can add music-on-hold capability to virtually any one-line or two-line phone with the On-Hold Plus MOH 150 Music-On-Hold Adaptor...the ultimate image tool for home office situations. Installs in seconds without tools. NO HOLD BUTTON REQUIRED! To put a call on-hold, simply push the hold button on the MOH 150. To release the hold condition, pick up any extension connected to that line. Suggested Retail Price: $59.95

Compatible with virtually all one-line and two-line telephones

No hold button required

Simple plug-in installation

No batteries or power source required

Excellent sound quality

Accepts virtually any audio source*

Installs in seconds!

MOH 150 music-on-hold adaptor

Phone cable

Audio cable

Easy, do-it-yourself connection instructions

External audio source (OHP 3000 recommended)*

Any one-line or two-line telephone

*ASCAP and BMI require payment of annual licensing royalties to play a radio, tapes or CDs on-hold.

Standard Single Wall Jack Installation

1. Unplug the existing line cord from your telephone and plug it into the jack marked "LINE" on the MOH 150.

2. Plug the provided line cord into the jack marked "PHONE" on the MOH 150 and connect the other end to your telephone.

3. Plug the provided audio cable into the jack marked "AUDIO". Plug other end into the headphone jack of your external audio source.

Other Possible Installations
The diagrams below illustrate three other possible connection schemes. If your wall jack or telephone connection is different from the standard installation (shown above), find your system's configuration and follow the diagram. All three of these connections require the purchase of an RJ-14 Two-line Telephone Outlet. This outlet is available through any Radio Shack (Radio Shack # 279-402).

Shown below is an illustration of an RJ-14 Two-Line telephone outlet. Note that in the first jack (line 1&2) there are four contacts, while in the other two jacks ( Line 1 and Line 2) there are only two contacts. This is the only type of jack that will work with this installation. This is a standard type outlet which is available through many consumer electronics retailers. You can also get this jack through any Radio Shack store (part #279-402).

* NOTE: The RJ-14 Two-line Telephone Outlets have a plug on the back side of the outlet. Do not connect this plug to any outlet. Leave plug exposed or tape over the exposed contacts on the rear of the jack.